Make The Medicine

Phoenix Tears – by Rick Simpson

For those of you who have watched the documentary “Run from the Cure”, this should answer any questions about producing your own oil. I recommend that people grow their own hemp either in a small indoor grow system or outdoors. Growing it yourself will eliminate the high cost associated with buying hemp from drug dealers. The cost of hemp can vary greatly from dealer to dealer and so can the quality of the hemp. For anyone new to growing hemp a good book or video on the subject is a necessity. Just go to one of the cannabis publications on line, or buy one of these publications at a local store where you live. If you do this you should have no trouble finding a good book on the subject. My personal favorite is The Indoor Outdoor Medicinal Growers Bible by Jorge Cervantes. Also Ed Rosenthal and many others have excellent books on the subject available.  

Caution: Oils that drug dealers sell can have many contaminants and often little or no THC. From my experience, most hemp oil available on the street should be avoided for medicinal use. Make your own oil or have someone you trust produce the oil to assure a very pure, high quality oil is produced.

How much to make and take?
One pound of very dry high quality cannabis hemp bud material will usually produce 55 to 60 grams of high grade oil. This amount of oil will usually cure most serious cancers unless the patient has been badly damaged by chemo and radiation. In such cases the patient can often still be saved, but they will have to ingest much more oil to undo the damage the chemo and radiation has left behind. The average patient can ingest a full 60 gram cancer treatment in about 90 days. But if they have been damaged by chemo and radiation often much more oil will need to be taken, over a longer period of time. Sometimes such patients will require 120 to 180 grams to undo the damage from all the chemo and radiation. Once the patient is cured and all the damage has been undone, I recommend that they continue to take a maintenance dose of about 1 gram per month to maintain good health. A small amount of oil about half the size of a piece of short grained dry rice three times a day is a good beginning. After four days double the amount you are taking per dose and try to continue to do so every four days there after. Until you have reached the point where you can ingest one third of a gram per dose. Taking the oil in this manner in the beginning allows the patient time to build up their tolerance for this substance. Some people soon acquire a very high tolerance and I always tell patients the faster you can take it the sooner you will be cured. I once had an eighty two year old man who was ingesting 2grams a day, who was still going to town everyday and no one could even tell he was taking it. In cases where people are taking strong and dangerous pain medications like morphine. I recommend that they begin treatment taking doses about the size of a grain of short grained dry rice. The idea is to increase their doses as quickly as possible to get off the dangerous pain medications and let the oil take their place to provide pain relief. High quality hemp oil from the proper strains can stop pain that even morphine has no effect on, also this oil can be applied to external injuries for pain relief in minutes.

Will I get high?
Following the dosage instructions previously described many people have reported to me that they did not get high during treatment.

Will I become addicted?
Hemp oil does not cause your body to crave more. It is non-addictive, harmless and effective for practically any medical condition.

Is this the same as hemp seed oil?
No this oil is produced from the bud material of the cannabis hemp plant and it is the essential oil of the hemp plant. Health food stores sell oil that is made from hemp seed that is often mislabeled as hemp oil what they really are selling is cold pressed hemp seed oil and that is what should be on their label. Although seed oil is very beneficial, it does not contain enough THC to have any effect on cancer and other serious illnesses.

Are hemp and marijuana the same?
The word marijuana is one of over four hundred slang terms used worldwide to describe the cannabis and/or hemp plant.

Are all hemp plants the same?
When buying or growing hemp, procure a strain that has the highest possible THC content. To energize someone suffering from depression, I recommend a good Sativa strain. For most other medical conditions, I strongly suggest that Indica strains be used. Indicas relax a person and provide them with more rest and sleep.

How do I use it?
High quality hemp oil can be vaporized, ingested, used as a suppository or applied topically. Also this oil can be mixed with creams and salves for beauty treatments and other external uses.

What Strain Should I Use?
This is a rather hard question to answer, since in reality we are all at the mercy of the seed merchants, for they are the ones who have the final say in what we are growing. The trouble is, if you were to order a strain like White Widow from five different seed suppliers. When you grew them you would likely end up growing five entirely different types of plants. The type of White Widow that I was growing back in Canada had a very heavy sedative effect like a good Indica variety and it was one of the best pain killers that I have ever encountered. But if I tried to order the same seeds from the company I originally purchased them from today, they would likely send me seeds with entirely different medicinal values. The White Widow I’ve seen here in Europe is much more energizing than what I was growing in Canada. Unfortunately for the most part it does not have the medicinal values that I am looking for to produce the heavy sleepy effect, like the White Widow I was growing back in Canada. So as you can see, when you order seeds from most seed companies, you are never really too sure what you will be growing. We need a good ongoing steady supply of seeds that have known medicinal values, so an ordinary person will know what they are growing. All we need is the freedom to grow the most medicinal strains on earth. Then using a simple process of elimination we could determine which strains produce the best oil to treat different medical conditions. After this is done a stable supply of these seeds could be made available to the public and they then could grow strains that suit their medical needs.

I always produce this oil using strong Indica varieties, but Indica dominant Sativa crosses can often produce excellent results also. There are thousands of strains that have been bred back and forth with each other and they all differ in their medicinal values. Some strains are better pain killers, while others may be better to control blood sugar levels for diabetics or ocular pressure for glaucoma patients. I have good reason to call the hemp plant, the plant with a thousand different medicinal profiles. Once you experience the medicinal effects, oils produced from different strains can have, you will understand exactly what I mean. But luckily for us, if the oil is properly produced it does work very well in the treatment of all types of cancer. At this time all I can do is tell the public to order strong Indica or Indica dominant Sativa crosses that have 20% THC or more, to produce their oil. Also people are always asking me where they can get seeds and this can be a real problem for those who live in some countries, that don’t allow them to be sold. If you go on the internet you will find many seed companies that will supply cannabis seeds. But the only company I know of that will ship seeds worldwide is the Attitude Seed Company out of the UK. I hope the information I have provided will be helpful to those who are trying to acquire the proper strain to produce their medication. We already know the wonderful healing effects this natural oil has, but we need the freedom to perfect the strains required to produce the most effective medicine.

My process:

I usually work with a pound or more of bud from very potent high quality Indica or Indica dominant Sativa crosses. An ounce of good bud will usually produce 3 to 4 grams of high grade oil and the amount of oil produced will vary from strain to strain. So you are never really sure how much oil you will get, until you have processed the material you are working with. But on average a pound of good bud will usually produce about 60 grams of high grade oil and sometimes you may even get a bit more. Many people will tell you that the oil should be amber and that you can see through it, in many cases the oils that I produced were exactly like that. But the color and texture of the oil you are producing depends a great deal on the strain and solvent that you are using to produce the oil. So don’t be concerned if the oil you produce happens to be darker in color, this does not mean that it is any less potent as a medicine.

The process that I am about to describe involves washing the starting material twice with a good solvent such as pure naphtha, to remove the available resin from the plant material. Naphtha has proven to be a very good solvent to produce the oil and in Europe it is often called benzine. The only solvents that I have direct experience with are ether, alcohol and naphtha. Ether is my personal favourite and it is a very effective solvent, but it is expensive and can be quite hard to get. I think the use of ether is better suited for closed distilling devices since it is very volitile and its fumes make it a bit dangerous to work with. Alcohol is not quite as effective as ether or naphtha as a solvent, since it is less selective in nature, but still it does work well. Alcohol will dissolve more chlorophyll from the starting material and due to this, oils produced with alcohol will usually be more noticeably dark in color. For a solvent to be effective it should be 100% pure and 100% pure alcohol is expensive and can be quite hard to find. Naphtha on the other hand is quite cheap to acquire and is usually not too hard to find. Many paint suppliers sell pure naphtha as paint thinners, so for the most part it is quite easy to get and next to the use of ether it is my solvent of choice.

All these solvents including alcohol are poisonous in nature, but if you follow these instructions solvent residue in the finished oil is not a concern. When you are done processing the oil after it cools to room temperature, it is a thick grease rather than an oil. The finished oil or in reality (grease) is about as anti poisonous as you can get. Even if there was a trace amount of solvent residue remaining, the oil itself would act upon it to neutralize any harmful poisonous effect. I don’t recommend the use of butane as a solvent to produce this medication, since it is very volatile and would require the use of expensive equipment to neutralize the danger. Also using butane to produce the oil does not decarboxylate the finished product, so oils produced in this manner would be much less effective for medicinal use.

The starting material must be as dry as possible, it is then placed in a container of good depth to prevent the oil solvent mix from splashing out during the washing process. Once the starting material is placed in the desired container it is then dampened with the solvent being used, be sure the area you are working in is well ventilated and there are no sparks, open flames or red hot elements in the area. After the material is dampened it is crushed using a length of wood such as a piece of 2×2, after it has been crushed add more solvent until the material is completely immersed, in the solvent. Work the material immersed in the solvent for about three minutes, with the length of wood you used to crush it with. Then slowly pour the solvent oil mix off into another clean container, leaving the starting material in the original container, so it can be washed for the second time.

Again add fresh solvent to the starting material until it is once more immersed in the solvent then work it for three more minutes with the length of wood you have been using. Then pour the solvent oil mix into the same container that is holding the solvent oil mix from the first wash you did. Trying to do a third wash on the plant material would produce very little oil and it would be of little or no benefit as a medicine. The first wash dissolves 70 to 80% of the available resin off the starting material, the second wash then removes whatever resin that is of benefit that remains.

Use something such as clean water containers with a small opening at the top and insert funnels into the openings, then put large coffee filters in the funnels. Pour the solvent oil mix from the first and second washes into the coffee filters and allow the solvent oil mix to drain through the filters to remove any unwanted plant material. Once the solvent oil mix has been filtered it is now ready to have the solvent boiled off.

Use an inexpensive large rice cooker with an open top that has both high and low heat settings to boil the solvent off the oil. Make sure that the rice cooker is set up in a well ventilated area and place a fan near by to blow away the fumes as the solvent boils off. Rice cookers are designed to not burn the rice as it cooks and the temperature sensors that are built in, will automatically put the cooker back on the low heat setting if the temperature within the cooker begins to get to high. When producing oil if the temperature gets too high it will vaporize the cannabinoids off the oil and of course you do not want this to occur. That’s the reason I strongly recommend the use of a rice cooker to those who have never produced oil before since it eliminates any danger of this happening, if the rice cooker is working properly.

Make sure there are no sparks, open flames or red hot elements in the area while you are filling the rice cooker or boiling the solvent off, because the fumes produced from the solvent are very flammable. I have used this same process thousands of times and have never had a mishap, but for your own safety please follow the instructions, I also caution you to avoid breathing in the fumes that solvents produce. Fill the rice cooker until it is about three quarters full, this allows room for the solvent oil mix to boil the solvent off without spilling over. Put the rice cooker on its high heat setting and begin boiling the solvent off, as the level in the rice cooker drops continue to carefully add the solvent oil mix you have remaining, until you have nothing left.

When the level in the rice cooker comes down for the last time and has been reduced to about two inches of solvent oil mix remaining, add a few drops of water to the solvent oil mix that remains. When I am boiling the solvent oil mix produced from one pound of starting material, I usually add 10 to 12 drops of water at this time. This small amount of water allows the remaining solvent to boil off the oil that remains in the cooker more readily. When there is very little remaining in the cooker, I usually put on a pair of gloves and then pick up the cooker and begin swirling its contents. Until the cooker automatically kicks off its high heat setting and then goes to low heat.

As the last of the solvent is being boiled off, you will hear a crackling sound from the oil that is left in the cooker and you will see quite a bit of bubbling taking place in the oil that remains. Also you will notice what looks like a small amount of smoke or steam, coming off the oil in the rice cooker. But don’t be concerned this is mostly just steam produced from the few drops of water that you added. After the rice cooker has automatically switched to its low heat setting, I take the inner pot out of the cooker and pour its contents into a stainless steel measuring cup. There will be a small amount of oil remaining in the pot that you will find almost impossible to get out, unless you use something like dry bread to absorb the oil while it is still warm. Then small amounts of this bread can be eaten as a medicine, but remember it can sometimes take an hour or more before you feel its effects. So be careful how much bread like this you consume, because it may put you to sleep for quite a few hours, just the same as the raw oil will do itself.

Take the oil that you poured into the stainless steel measuring cup and put it on a gentle heating device such as a coffee warmer, to evaporate off whatever water remains in the oil. Quite often it only takes a short time to evaporate the remaining water off, but also some strains produce more natural turpins than others. These turpins can cause the oil you now have on the coffee warmer to bubble for quite some time and it may take awhile for such oils to cease this activity. When the oil on the coffee warmer has stopped bubbling and there is little or no activity visible, take the oil off the coffee warmer and allow it to cool a bit.

Then using plastic applicators or syringes with no needles, that are available in your local drug store. Use the plunger of the syringes to slowly draw the warm oil up into the syringes and allow it to cool. In a short time the oil will become a thick grease, sometimes the oil can be so thick that it can be hard to force it out of the syringes when cooled. If such a thing happens simply run hot water over the syringe and your doses can then be forced out much more easily. Sometimes a patient will force out too much oil, but if this happens just pull back on the plunger of the syringe and the excess oil can usually be drawn back into the syringe without too much difficulty.

On average if I have a dry pound of material to work with, it will require about two imperial gallons of solvent, or 9 liters which equals about 320 fluid ounces to do the two washes that are required. If you plan to produce the oil from more or less starting material, simply do the math to determine roughly how much solvent you will require. From start to finish it usually takes me about four hours to accomplish the whole process, then the medicine is sitting there ready to be used. It should also be mentioned that this oil has an extremely long shelf life, if kept in a cool dark place for storage. I think these instructions should make producing this oil quite easy for anyone, but before you start make sure that you have everything you will need to do it properly.

At first it may seem daunting for some to try to produce their own medicine, but in reality this process is extremely simple. All you have to do is carefully follow the instructions and after you produce this medication a couple of times, you will find that it is not much harder to make than a cup of coffee. Once you have produced your own medication it takes all the mystery out of medicine and you no longer have to rely on doctors in most cases, for now you are your own doctor. Welcome to the world of real medicine, medicine that does no harm and is effective for practically all diseases and conditions and a wonderful natural medication that you now know how to produce yourself.

Best Wishes and Good Health,

Rick Simpson

http://phoenixtears.ca/make-the-medicine/