Remington Model 887™ Shotgun Recall

Remington

PRODUCTS: Remington is voluntarily recalling Remington Model 887™ shotguns manufactured from December 1, 2013 to November 24, 2014.

DESCRIPTION OF THE HAZARD: Remington has determined that some Remington Model 887™ shotguns manufactured between December 19, 2013 and November 24, 2014 may exhibit a defect causing the firing pin to bind in the forward position within the bolt, which can result in an unintentional discharge when chambering a live round. While Remington has the utmost confidence in the design of the 887™ shotgun, it is undertaking this recall in the interest of consumer safety.  

REMEDY/ACTION TO BE TAKEN: STOP USING YOUR SHOTGUN. Any unintended discharge has the potential to cause injury or death.Immediately cease use of recalled shotguns and return them to Remington free of charge. Shotguns will be inspected, repaired, tested, and returned as soon as possible, at no cost to you. DO NOT attempt to diagnose or repair recalled shotguns yourself. For your safety, STOP USING YOUR SHOTGUN and immediately contact Remington.

TO PARTICIPATE IN THIS RECALL PROGRAM:

To participate in the recall, please follow the instructions below:

STEP 1      Visit 887recall.remington.com or call 1-800-243-9700 (Prompt #3 then Prompt #2) Monday through Friday, 9 a.m. to 5 p.m. EDT. You will be asked to provide your name, address, telephone number, and shotgun(s) serial number.

STEP 2      Upon receipt of the information requested in Step 1, Remington will send you boxes and written instructions, and arrange for UPS to pick-up your shotgun(s). Please do not return your shotgun on your own. Remington will arrange for pick-up of your Model 887™.

VERIFICATION OF CORRECTIVE ACTION: Upon repair of your shotgun, you will note a punch mark on the bolt (see photo below). This mark confirms your shotgun has been inspected and repaired by Remington under the recall program.

887 bolt mark

Remington has also corrected the manufacturing process to eliminate this potential firing pin problem in shotguns manufactured after November 24, 2014. Shotguns manufactured after November 24, 2014 will also have a punch mark on the bolt.

Even after your shotgun has been inspected and repaired under this recall program, always follow the Ten Commandments of Firearm safety, printed below, whenever you handle any firearm.

The Ten Commandments of Firearms Safety

1. Always keep the muzzle pointed in a safe direction.
2. Firearms should be unloaded when not actually in use.
3. Don’t rely on your gun’s safety.
4. Be sure of your target and what’s beyond it.
5. Use proper ammunition.
6. If your gun fails to fire when the trigger is pulled, handle with care.
7. Always wear eye and ear protection when shooting.
8. Be sure the barrel is clear of obstructions before shooting.
9. Don’t alter or modify your gun and have it serviced regularly.
10. Learn the mechanical and handling characteristics of the firearm you are using.

Remington is deeply sorry for this inconvenience, but we believe in safety first. It is imperative that Model 887™ shotguns subject to this recall are not used until they have been inspected and repaired by Remington.

http://www.remington.com/pages/news-and-resources/safety-center/safety-warning-recall-notice-Remington-model887.aspx

2 thoughts on “Remington Model 887™ Shotgun Recall

  1. Remington,
    We just need you to return the 887’s in a timely matter……or even send the parts and a link to a youtube video on how to perform the repairs.
    Remington……Time is short and we do not need to be without the products we rely on for our security

  2. Remington is part of the Hall of Shame (if you listen to Henry and JD’s radio show) so it doesn’t surprise me that they have come out with a faulty shot gun. They may have done this on purpose.

Join the Conversation

Your email address will not be published. Required fields are marked *


*